wave
File name : ADDBBS
Description: This file is displayed the a user is adding a new bulletin
board to the BBS listing.
Wave Codes : ~BN [pos] BBS Name
~PN [pos] Phone Number
~SN [pos] SysOp's Name/Handle
~BR [pos] Max Baudrate
~SF [pos] BBS Software
~ST [pos] Storage
~IN [pos] Other information
~OT [pos] Other Prompts (ie "Saving BBS", "BBS Saved")
File Name : AUTOTOP
Description: This file is displayed as the header to the auto-message
screen, it's displayed before the actual text in the auto-
message.
Wave Codes : ~MT [txt] Auto-message Title
~SN [txt] Sender's Name
~TL [pos] The Top Line Of The Auto-message Text
File Name : AUTOBOT
Description: This file is displayed as the footer to the auto-message,
this is placed at the end of the actual text.
Wave Codes : ~MT [txt] Auto-message Title
~SN [txt] Sender's Name
File Name : CHATMODE
Description: This file is used for the split-screen chat screen.
Wave Codes : ~ST [pos] Top Left Corner Of The SysOp's Chat Window, And
Colour For SysOp's Chat Text.
~SB [pos] Bottom Right Corner Of The SysOp's Chat Window.
~UT [pos] Top Left Corner Of The User's Chat Window, And
Colour For The User's Chat Text.
~UB [pos] Bottom Right Corner Of The User's Chat Window.
File Name : FILEINFO
Description: This file is displayed when the user has requested more
information on a file.
Wave Codes : ~FN [txt] File Name.
~DL [txt] Number Of Downloads.
~SZ [txt] Size Of File (In Bytes).
~UL [txt] Uploader's Name.
~DT [txt] File Date.
~UD [txt] Date Uploaded.
~TM [txt] Transfer Time (In Minutes).
~FP [txt] File Point Value.
~## [txt] Line ## Of This File's Description (If
Available).
File Name : FILETEST
Description: This file is displayed when a file is being tested using the
internal file scanner system after a successful upload.
Wave Codes : ~FN [txt] File Name Of File Being Processed.
~FS [txt] Size Of The File Being Processed.
~PI [pos] Position For Information And Status Strings.
~L1 [lit] Integrity/CRC Test Light.
~L2 [lit] Archive Decompression Light.
~L3 [lit] Virus Scan Light.
~L4 [lit] Age test Light.
~L5 [lit] File Deletion Light.
~L6 [lit] Archive Comment Application Light.
~L7 [lit] External Maintenance Light.
~L8 [lit] Description Import Light.
~L9 [lit] Sauce Comment Check Light.
File Name : FSEDITOR
Description: This file is displayed when a user is posting a message in
one of the message bases, also know as the full screen
editor.
Wave Codes : ~MT [pos] Message Title.
~CM [pos] Editor Command Prompt Position.
~TL [pos] Top Line Of The Message Editor.
~BL [pos] Bottom Line Of The Message Editor.
~AN [pos] Anonymous Message Toggle (Yes/No).
~AS [pos] AutoSig Usage Toggle (Yes/No).
~SL [pos] Status Line Position (Row). Must Be Placed
Between The ~TL and ~BL Wave Codes.
These codes are not necessary, but may be included.
~SN [pos] Sender's Name.
~RN [pos] Receiver's Name.
~DT [pos] Message Date.
~TI [pos] Message Time.
~IN [pos] Insert Mode Status (On/Off).
~LN [pos] Current Line Number.
~CN [pos] Current Column Number.
File Name : LISTFILE
Description: This is the full screen file listing template file. The
following wave codes are mandatory.
Wave Codes : ~TL [pos] Top Line Of File Listing Region.
~BL [pos] Bottom Line Of File Listing Region.
~PM [pos] Position (Row) For The File Listing Horizontal
Menu.
~PI [pos] Position (Row) For Other Information
String/Prompts.
~FI [pos] Column For The List File Numbers [Optional].
~FN [pos] Column For The List File Names.
~FS [pos] Column For The File Sizes [Optional].
~FP [pos] Column For The File Points [Optional].
~FD [pos] Column For The File Descriptions.
~FT [pos] Column For The Flag Character.
~C1 [col] Normal Text Colour.
~C2 [col] Dark Text Colour.
~C3 [col] Bright Text Colour.
~C4 [col] Normal Hi-Lighted Colour.
~C5 [col] Dark Hi-Lighted Colour.
~C6 [col] Bright Hi-Lighted Colour.
These codes are not mandatory, but may be used.
~AN [txt] Name Of File Area.
~FA [txt] Current File Area Being Listed.
~Sx [pos] Start Position Of Scroll Bar (Horizontal only).
This code Should Be In The Colour That You Want For
The Scroll Bar Background, And 'x' Should Be The
Scroll Bar Background Character (Any Character).
~Ex [pos] End Position Of Scroll Bar. This Should Be In The
Colour That You Want For The Actual Bar, And 'x'
Should Be The Bar Character (Any Character).
File Name : LOGIN
Description: This file is used in the full screen logon screen, the screen
where the user enter's their name and password.
Wave Codes : ~LN [pos] Position To Prompt For Login Name.
~LP [pos] Position To Prompt For Password.
~LI [pos] Position To Display And Prompt For Other
Information, Such As The User's phone Number, Birth
Date, System Password, Etc.
~LH [pos] Position To Display Login Help Strings.
File Name : MAILHEAD
Description: This file is displayed when the user is reading their EMAIL,
this is used as the header for the screen.
Wave Codes : ~TI [txt] Time Message Was Created.
~DT [txt] Date Message Was Created.
~SN [txt] Sender's Name.
~RN [txt] Receiver's Name.
~MT [txt] Message Title.
~MN [txt] Message Number Out Of Total Messages.
~ST [txt] Message Status.
~UN [txt] Sender's User Note.
~TL [pos] Top Line Of Message Text
File Name : MSGHEAD
Description: This file is displayed when a user is reading messages in the
message bases, this is used as the header for the screen.
Wave Codes : ~TI [txt] Time Message Was Created.
~DT [txt] Date Message Was Created.
~SN [txt] Sender's Name.
~RN [txt] Receiver's Name.
~MT [txt] Message Title.
~MN [txt] Message Number Of Total Messages.
~MA [txt] Current Message Area Name.
~RP [txt] Number Of Replies To This Message.
~ST [txt] Message Status.
~UN [txt] Sender's User Note.
~TL [txt] Top Line Of Message Text.
File Name : NEWCFG
Description: This file is displayed when a new user has completed the
application, this will allow them to make any last minute
modifications.
Wave Codes : ~** [pos] Position To Prompt For User Configuration
Commands.
~*A [pos] Text File Library Author.
~Ax [pos] Password.
~Bx [pos] Phone Number.
~Cx [pos] Birth Date (Not Recommended).
~Dx [pos] Location.
~Ex [pos] Street Address.
~Fx [pos] Usernote.
~Gx [pos] Page Length.
~Hx [pos] Yes/No Bars (Yes/No).
~Ix [pos] Expert Mode (Yes/No).
~Jx [pos] Hot Key's (Yes/No).
~Kx [pos] Screen Pausing (Yes/No).
~Lx [pos] AutoQuote (Yes/No).
~Mx [pos] Terminal Emulation.
~Nx [pos] Current text File Library Set.
~Ox [pos] User's Postal/Zip Code.
Note: For the above codes 'x' can be any character (other then ESC).
This character will be the key that allows the user to edit that
particular item. Be sure not to have two key's the same.
File Name : NUV
Description: This file is displayed when a new user has to be voted on,
any user that has access will see this screen and can vote on
the new user.
Wave Codes : ~UN [txt] User Name Of The User Being Voted On.
~YV [txt] Number Of 'Yes' Votes So Far.
~NV [txt] Number Of 'No' Votes So Far.
~YN [txt] Number Of 'Yes' Votes Needed To Be Validated.
~NN [txt] Number Of 'No' Votes Before Auto-Deletion.
~01-~12 [txt] Comment # 1-12.
File Name : QWKDL
Description: This file is displayed when the user is downloading a QWK
offline mail packet.
Wave Codes : ~LC [lit] Light When Creating Control File.
~LD [lit] Light When Creating Door Information File.
~LE [lit] Light When Exporting New Messages.
~LI [lit] Light When Including Information Files.
~LZ [lit] Light When Compressing QWK Packet.
~MA [pos] Current Message Area Name.
~MS [pos] Total Number Of Msgs In This Area.
~NM [pos] Number Of New Messages In This Area.
~TS [pos] Total Size Of QWK Packet (In Kbytes,
Uncompressed).
~EA [pos] Echomail Area? (Yes/No).
~TN [pos] Total Number Of Msgs Exported.
File Name : QWKUL
Description: This file is displayed when uploading an REP offline mail
reply packet.
Wave Codes : ~LU [lit] Light When Uncompressing REP Packet.
~LP [lit] Light When Processing Replies.
~LS [lit] Light When Updating Message Statistics.
~MA [pos] Current Message Area.
~TM [pos] Total Number Of Imported Messages.
~SN [pos] Sender Of Current Message.
~RN [pos] Receiver Of Current Message.
~MT [pos] Title Of Current Message.
File Name : SHOWBBS
Description: This file is displayed when a user has requested to view a
single BBS in the list.
Wave Codes : ~BN [txt] BBS Name.
~PN [txt] Phone Number.
~SN [txt] SysOp's Name.
~BR [txt] Max Baudrate.
~SF [txt] BBS Software.
~ST [txt] File Storage.
~IN [txt] Other Information.
~NM [txt] Listing Number.
File Name : TETRIS
Description: This file is displayed when a user has requested to play the
tetris game.
Wave Codes : ~TL [pos] Top Left Corner Of The Playing Field.
~BR [pos] Bottom Right Corner Of Playing Field.
~SC [pos] User's Score.
~LN [pos] Number Of Lines Zapped.
~LV [pos] Current Level.
File Name : TBNK
Description: This file is displayed when a user view the status of
the time bank.
Wave Codes : ~TT [txt] Time in time bank.
~TD [txt] Time deposited today.
~TW [txt] Time withdrawn today.
~MA [txt] Max time allowed in bank.
~MD [txt] Max time deposit per day.
~MW [txt] Nax time withdraw per day.
~KK [txt] Download KB in bank.
~KD [txt] KB deposit today.
~KW [txt] KB withdrawn today.
~KA [txt] Max KB allowed in bank.
~MK [txt] Max KB withdraw per day.
~ME [txt] Max KB deposit per day.
* %TL and %DK are used with this screen
File Name : USERCFG
Description: This file is displayed when a user has entered the user
configuration editor, they only have the option to edit their
own account.
Wave Codes : ~** [pos] Position To Prompt For User Configuration
Commands.
~*A [pos] Text File Library Author.
~Ax [pos] Password.
~Bx [pos] Phone Number.
~Cx [pos] Birth Date (Not Recommended).
~Dx [pos] Location.
~Ex [pos] Street Address.
~Fx [pos] Usernote.
~Gx [pos] Page Length.
~Hx [pos] Yes/No Bars (Yes/No).
~Ix [pos] Expert Mode (Yes/No).
~Jx [pos] Hot Key's (Yes/No).
~Kx [pos] Screen Pausing (Yes/No).
~Lx [pos] AutoQuote (Yes/No).
~Mx [pos] Terminal Emulation.
~Nx [pos] Current text File Library Set.
~Ox [pos] User's Postal/Zip Code.
Note: For the above codes 'x' can be any character (other then ESC). This
character will be the key that allows the user to edit that particular
item. Be sure not to have two key's the same.
wave.txt · Last modified: by admin